Navy Flame Resistant Zip-Up Hooded Sweatshirt (Medium + Large)
3025FRN-M
Our zip up hooded sweatshirt is built just like your favorite sweatshirt except better. We start with continuous ribbed cuffs and waist, a dielectric coil zip closure, and two front hand warmers pockets. The soft lined fleece adds warmth along with three piece hood that can be worn with hard hats.
FR Hoodies
Size | Chest Circ. | Hoodie Chest Circ. | Front Length | Tall Front Length | Sleeve Length* | Tall Sleeve Length |
S | 34 - 36 | 49 | 21 3/4 | 27 3/4 | ||
M | 38 - 40 | 51 | 22 3/8 | 28 1/8 | ||
L | 42 - 44 | 53 | 23 3/4 | 24 3/4 | 28 3/4 | 30 1/4 |
XL | 46 - 48 | 55 1/2 | 24 3/4 | 25 3/4 | 29 1/8 | 30 5/8 |
2XL | 50 - 52 | 59 | 24 3/4 | 25 3/4 | 29 1/8 | 30 5/8 |
3XL | 54 - 56 | 63 | 25 1/2 | 28 7/8 | ||
4XL | 58 - 60 | 67 | 25 1/2 | 28 7/8 | ||
5XL | 62 - 64 | 71 | 26 1/4 | 28 3/4 |
*Sleeve length measured from center back of neck to wrist.
Made by Benchmark FR in the United States using American Fleece Blend 2344-090 55% Protex, 45% FR Cotton
Front Hand-Warmer Pockets
Excellent stretch and recovery
Less than 5% shrinkage with wash
Skin Safe
UL Classified to NFPA 2112-2018
Meets NFPA 70E requirements
Arc Rating (EBT) = 19 cal/cm2
ARC / CAT 2
OSHA 1910.269
OSHA 1910.960
Meets ASTM F1506
NESC 2012
Individual Serial number
Made by Benchmark FR in the United States using American Fleece Blend 2344-090 55% Protex, 45% FR Cotton.
This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.
This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.
Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (EBT) = 19 cal/cm2
This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.
Individually Serialized & Traceable
Zero Recalls
Zero Injuries Reported
Ships within 1 business day
Free Shipping within the United States on orders over $25. Expedited shipping options available at checkout for an additional cost
International shipping charges are calculated at checkout
Machine wash warm, tumble dry low
Use soft powder or liquid laundry detergent
Do not use bleach, fabric softener or laundry pods