Unisex Zip-Up FR Hoodie
3025FRBK-XS
Our FR Zip-Up Hooded Sweatshirt is constructed like your favorite ‘hoodie’ with a generous fit, large hand warmer, and a lined drawstring hood. Our FR Hoodie is made from an inherent blend fleece that is ultrasoft and safe to wear against the skin. Reinforced stitching on the corners and stress points increases durability. Zipper is made from FR materials with dielectric teeth and pull (non-metallic).
For added warmth, the sweatshirt can be part of a layering system for greater insulation. Jacket Test Report
Our Zip-Up Hoodie has a unisex fit can easily be worn by guys and gals alike. Choose a larger size if you want to layer under your sweatshirt, or just stick to your normal/equivalent size for everyday use.
Model is 5’6”
Shirt Size: Normally wears Women's Small / Shown here wearing Men's Small
FR Hoodies
Size | Chest Circ. | Hoodie Chest Circ. | Front Length | Tall Front Length | Sleeve Length* | Tall Sleeve Length |
S | 34 - 36 | 49 | 21 3/4 | 27 3/4 | ||
M | 38 - 40 | 51 | 22 3/8 | 28 1/8 | ||
L | 42 - 44 | 53 | 23 3/4 | 24 3/4 | 28 3/4 | 30 1/4 |
XL | 46 - 48 | 55 1/2 | 24 3/4 | 25 3/4 | 29 1/8 | 30 5/8 |
2XL | 50 - 52 | 59 | 24 3/4 | 25 3/4 | 29 1/8 | 30 5/8 |
3XL | 54 - 56 | 63 | 25 1/2 | 28 7/8 | ||
4XL | 58 - 60 | 67 | 25 1/2 | 28 7/8 | ||
5XL | 62 - 64 | 71 | 26 1/4 | 28 3/4 |
*Sleeve length measured from center back of neck to wrist.
Made by Benchmark FR in the United States using Fleece 55% Protex, 45% Cotton fabric
Front Hand-Warmer Pockets
Excellent stretch and recovery
Less than 5% shrinkage with wash
Skin Safe
UL Classified to NFPA 2112-2018
Meets NFPA 70E requirements
Arc Rating (EBT) = 19 cal/cm2
ARC / CAT 2
OSHA 1910.269
OSHA 1910.960
Meets ASTM F1506
NESC 2012
Individual Serial number
Made by Benchmark FR in the United States using American Fleece Blend 2344-090 55% Protex, 45% FR Cotton
This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.
This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.
Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (EBT) = 19 cal/cm2
This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.
Individually Serialized & Traceable
Zero Recalls
Zero Injuries Reported
Ships within 1 business day if not customized
If embroidery and/or patch options are selected, order will ship within 3 business days of artwork approval when applicable
Free Shipping on orders over $25 within the United States. Expedited shipping options available at checkout for an additional cost
International shipping charges calculated at checkout
Machine wash warm, tumble dry low
Use soft powder or liquid laundry detergent
Do not use bleach, fabric softener or laundry pods