3033FRLG

FR Hard Hat Liner - Summer

Size Guide

Sold Out $10.19

Collections: FR Accessories

Category: 7.5 oz. Inherent FR Blend, ASTM F1506, ATPV = 9 cal/cm2, HRC 2, Made In The USA, NFPA 70E Compliant

Protect Yourself from Red Necks & Sunburn

AVAILABLE AT AMAZON

Despite the header, we are as serious as cancer about this hard hat liners job. The most common places for sun-related skin cancer is your neck and ears. If you are working in the sun all day, it is important to protect yourself. This warm weather FR hard hat liner is safe to wear directly against your skin, it is soft, thin and can be used as a cooling towel under your hard hat.

If you would normally wear a baseball cap to keep the sun off your head, then you should consider this for when you wear a hard hat. NFPA states "Clothing and other apparel (such as hard hat liners and hair nets) made from materials that do not meet the requirements regarding melting, or made from materials that do not meet flammability requirements shall not be permitted to be worn.” In other words, the FR Hard Hat Liner will not further "contribute to the extent of an injury (OSHA).

Compliance

ARC Rating (Ebt) = 9 cal/cm2
HRC/ARC Level 2
NFPA 70E Compliant
OSHA 1910.269
Meets ASTM F1506
NESC 2012

Customer Reviews

Based on 3 reviews Write a review

Benchmark FR Fit Guide

Step:1

Measure Your Body

Chest

From a standing position, measure the circumference of your upper body at the fullest part of your chest, typically just under the arm pit.

Sleeve

Bend your elbow as shown. Start at the center back of your neck and measure across the shoulder, around the elbow and to your wrist.

Waist

Measure around your natural waist where your pants sit most comfortably. Alternatively, you can look at the tag in the pants you are wearing.

Inseam

Remove your shoes and measure from your crotch to your ankle.

benchmark fr fit guide measurement graphic

Step:2

COMPARE YOUR BODY MEASUREMENTS TO SIZE CHART

Step:3

FIND YOUR SIZE

Men's Pants & Jeans [ Work Fit]

Size	W30	W32	W34	W36	W38	W40	W42	W44	W46	W48
Measured Waist, Inches	30-31 1/2	32-33 1/2	34-35 1/2	36-37 1/2	38-39 1/2	40-41 1/2	42-43 1/2	44-45 1/2	46-47 1/2	48-49 1/2
Pant Waist Circumference, Inches	31 1/2	33 1/2	35 1/2	37 1/2	39 1/2	41 1/2	43 1/2	45 1/2	47 1/2	49 1/2
Pant Low Hip Circumference, Inches	41	43	45	47	49	51	53 1/2	55	57	59
Inseam Length	All pants are hemmed to length. Specify inseam length or X-Short (28"), Short (30"), Regular(32"), Long (34"), X-Long (36").

Men's Button Up Shirts [Work Fit]

Size	S	M	L	XL	2XL	3XL	4XL	5XL
Measured Chest, Inches	34-36	38-40	42-44	46-48	50-52	54-56	58-60	62-64
Shirt Chest Circumference, Inches	45	47	49	51 1/2	55	59	63	67
Shirt Sleeve Length, Inches	33 1/2	34 1/2	35	35 3/4	35 3/4	35 3/4	35 3/4	35 3/4
Shirt Back Length, Inches	29	30	31	31 1/2	32	33	33 1/2	33 3/4
Tall Shirt Sleeve Length, Inches			36 1/2	37 1/4	37 1/4
Tall Shirt Back Length, Inches			32	32 1/2	33

Men's 2nd Skin Shirt [Base Layer Fit]

Size	S	M	L	XL	2XL	3XL	4XL	5XL
Measured Chest, Inches	34-36	38-40	42-44	46-48	50-52	54-56	58-60	62-64
Shirt Chest Circumference, Inches	41 1/2	43 1/2	45 1/2	48	51 1/2	55 1/2	59 1/2	63 1/2
Shirt Sleeve Length, Inches	33 3/4	34 1/8	35 1/8	35 3/2	35 3/8	35 3/8	35 3/4	35 3/8
Shirt Back Length, Inches	28	29	30	31	31	31 3/4	31 3/4	32 1/2

Men's Sweatshirts [Work Fit]

Size	S	M	L	XL	2XL	3XL	4XL	5XL
Measured Chest, Inches	34-36	38-40	42-44	46-48	50-52	54-56	58-60	62-64
Sweatshirt Chest Circumference, Inches	44	46	48	50	54	58	62	64
Sweatshirt Sleeve Length, Inches	34 3/4	35 1/2	36 1/4	37	37	37	37	37
Sweatshirt Back Length, Inches	28	29	29 1/2	30	30 1/4	31 1/2	32 3/2	33

Men's Jackets [Outerwear Fit]

Size	S	M	L	XL	2XL	3XL	4XL	5XL
Measured Chest, Inches	34-36	38-40	42-44	46-48	50-52	54-56	58-60	62-64
Jacket Chest Circumference, Inches	48	50	52	54 3/4	58 1/2	62 1/2	66 1/2	70 1/2
Jacket Sleeve Length, Inches	33 1/4	33 1/2	35	35 3/4	35 7/8	35 7/8	36 3/8	36 3/8
*Jacket Back Length, Inches	28 1/4	28 1/4	28 3/4	28 3/4	29 1/4	29 1/4	29 3/4	29 3/4

*Shows Insulated Bomber Jacket (6008FR) length. Add 2" for Insulated Parka (6015FR) Length.

Our Fit Defined

Outerwear Fit

Can be worn over a base layer, work shirt or combination of both and still provides room for movement.

Work Fit

Designed to be worn over a base layer or t-shirt. Has extra room around arm pit and chest for ease of mobility. Extra body length ensures shirt stays tucked in.

Base Layer Fit

Fits like a comfortable t-shirt. Sits closer to the body but is not snug like athletic wear. Extra body length ensures shirt stays tucked in.

Extras:

CUSTOM SIZES & TIPS

If you have a need for custom fitting FR we can help make code compliant and custom clothing to fit.

The easiest way to make your custom size is for you to send us a “like” garment which we measure, create a custom pattern and then manufacture your custom fit FR. By a “like” garment we mean if you want a button up shirt send us your favorite non-FR button up shirt. Within a week we will send back your garment after taking its specifications. A few weeks later three sets of your soon to be favorite FR clothing will arrive at your door!

MEASURING YOUR T-SHIRT-SIZE

In most cases, your t-shirt size will directly correspond to the size of Benchmark FR shirt or outwear you normally wear.

ALREADY WEARING ANOTHER FR BRAND?

We can help! If you are currently wearing another FR brand we can easily determine what Benchmark FR size will fit closest to your garment. Most FR brands vary in fit and sizing may not be consistant between brands. Problem Solved; just tell us what brand and size you are wearing and we can tell you the Benchmark FR size that corresponds directly to that brand. Please call (888) 360-0663.