Additional Discounts can be applied with the Coyote Ugly Welding Shirt
Coyote Ugly Snap-Up Welding Shirt with two chest pockets and snap cuffs. The shirt consists of royal blue thread for contrasting stitching, two snap closure chest pockets with pen holder in left pocket, snap cuffs, slightly longer sides so shirt will stay tucked.
Free shipping within the Contigious USA
Pearl snap cuffs
Left chest pocket pen holder
Longer sides so shirt stays tucked
Royal blue stitching
Arapaho 88% FR Cotton/ 12% Nylon fabric
UL Classified to NFPA 2112-2018
Meets NFPA 70E requirements
Arc Rating (ATPV) - 12 cal/cm2
HRC / CAT 2
Meets ASTM F1506
Individual Serial number
Made by Benchmark FR in the United States using Arapaho 88% FR Cotton/ 12% Nylon fabric.
This item meets the performance specification ASTM F1506-18 which is the Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Arcs. This specification is called out in OSHA 1910.269, NFPA 70E and CSA Z462.
This clothing item is UL Certified and meets the requirements of NFPA 2112-2018. It is considered flame resistant clothing for protection against short term duration thermal exposure from fire in accordance with NFPA 2112-2018. Note that NFPA 2113 requires upper and lower body coverage.
Meets NFPA 70E: Standard for Electrical Safety in the Workplace. Arc Flash PPE Category 2 or “CAT 2” with an Arc Rating (ATPV) = 12 cal/cm2
This garment is constructed from arc and flame resistant fabric and components in a facility with audited quality controls. It will resist ignition and not continue to burn when the ignition source is removed. This garment is not intended for fire-fighting activities and provides no protection from chemical exposure. This garment will maintain its flame resistant properties for the life of the garment provided wash and care instructions are followed.