6008FRN-S

FR Insulated 'Fire Ram' Bomber

Size Guide
Size
Color

FR Winter Jackets

FR winter jackets have evolved. The Benchmark FR Insulated Bomber Jacket is lined with our next generation FR insulation called FIRE RAM. This system incorporates a hollow core of lightweight, flexible insulation which is not bulky to wear. This cold weather system is 15% thinner and 20% warmer than "quilted modacrylic." found in almost all other brands.

Fire Ram will not separate at the elbow or shoulder joint, and it is wind resistant while still allowing for sweat to escape. It has an Arc Rating (ATPV) - 34 cal/cm2 and is HRC/ARC Level 3 rated to protect against ARC flash and flash fire.

The jacket has two welt pockets, an inside security pocket, and gas detection loop on the shoulder. The front closure has a storm flap and concealed zipper pull cover. This jacket may look classic but the technology used in it is unprecedented in the arc and flame resistant clothing industry. The Fire Ram Bomber jacket is proudly made in the USA. One last thing...there is no cheesy elastic waist, this is a nice, clean, FR winter coat.

Compliance

  • Arc Rating (ATPV) - 34 cal/cm2
  • HRC/ARC Level 3
  • NFPA 2112 Complian
  • NFPA 70E Compliant
  • OSHA 1910.269
  • OSHA 1910.960
  • Meets ASTM F1506
  • NESC 2012

Customer Reviews

Based on 3 reviews Write a review
Benchmark FR Fit Guide
Step:1

Measure Your Body

Chest

From a standing position, measure the circumference of your upper body at the fullest part of your chest, typically just under the arm pit.

Sleeve

Bend your elbow as shown. Start at the center back of your neck and measure across the shoulder, around the elbow and to your wrist.

Waist

Measure around your natural waist where your pants sit most comfortably. Alternatively, you can look at the tag in the pants you are wearing.

Inseam

Remove your shoes and measure from your crotch to your ankle.

benchmark fr fit guide measurement graphic



Step:2

COMPARE YOUR BODY MEASUREMENTS TO SIZE CHART

Step:3

FIND YOUR SIZE

Men's Pants & Jeans [ Work Fit]

Size W30 W32 W34 W36 W38 W40 W42 W44 W46 W48
Measured Waist, Inches 30-31 1/2 32-33 1/2 34-35 1/2 36-37 1/2 38-39 1/2 40-41 1/2 42-43 1/2 44-45 1/2 46-47 1/2 48-49 1/2
Pant Waist Circumference, Inches 31 1/2 33 1/2 35 1/2 37 1/2 39 1/2 41 1/2 43 1/2 45 1/2 47 1/2 49 1/2
Pant Low Hip Circumference, Inches 41 43 45 47 49 51 53 1/2 55 57 59
Inseam Length All pants are hemmed to length. Specify inseam length or X-Short (28"), Short (30"), Regular(32"), Long (34"), X-Long (36").

Men's Button Up Shirts [Work Fit]

Size S M L XL 2XL 3XL 4XL 5XL
Measured Chest, Inches 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Shirt Chest Circumference, Inches 45 47 49 51 1/2 55 59 63 67
Shirt Sleeve Length, Inches 33 1/2 34 1/2 35 35 3/4 35 3/4 35 3/4 35 3/4 35 3/4
Shirt Back Length, Inches 29 30 31 31 1/2 32 33 33 1/2 33 3/4
Tall Shirt Sleeve Length, Inches     36 1/2 37 1/4 37 1/4      
Tall Shirt Back Length, Inches     32 32 1/2 33      

Men's 2nd Skin Shirt [Base Layer Fit]

Size S M L XL 2XL 3XL 4XL 5XL
Measured Chest, Inches 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Shirt Chest Circumference, Inches 41 1/2 43 1/2 45 1/2 48 51 1/2 55 1/2 59 1/2 63 1/2
Shirt Sleeve Length, Inches 33 3/4 34 1/8 35 1/8 35 3/2 35 3/8 35 3/8 35 3/4 35 3/8
Shirt Back Length, Inches 28 29 30 31 31 31 3/4 31 3/4 32 1/2

Men's Sweatshirts [Work Fit]

Size S M L XL 2XL 3XL 4XL 5XL
Measured Chest, Inches 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Sweatshirt Chest Circumference, Inches 44 46 48 50 54 58 62 64
Sweatshirt Sleeve Length, Inches 34 3/4 35 1/2 36 1/4 37 37 37 37 37
Sweatshirt Back Length, Inches 28 29 29 1/2 30 30 1/4 31 1/2 32 3/2 33

Men's Jackets [Outerwear Fit]

Size S M L XL 2XL 3XL 4XL 5XL
Measured Chest, Inches 34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64
Jacket Chest Circumference, Inches 48 50 52 54 3/4 58 1/2 62 1/2 66 1/2 70 1/2
Jacket Sleeve Length, Inches 33 1/4 33 1/2 35 35 3/4 35 7/8 35 7/8 36 3/8 36 3/8
*Jacket Back Length, Inches 28 1/4 28 1/4 28 3/4 28 3/4 29 1/4 29 1/4 29 3/4 29 3/4

*Shows Insulated Bomber Jacket (6008FR) length. Add 2" for Insulated Parka (6015FR) Length.

Our Fit Defined

benchmark fr outerwear fit graphic

Outerwear Fit

Can be worn over a base layer, work shirt or combination of both and still provides room for movement.

benchmark fr work fit graphic

Work Fit

Designed to be worn over a base layer or t-shirt. Has extra room around arm pit and chest for ease of mobility. Extra body length ensures shirt stays tucked in.

benchmark fr base layer fit graphic

Base Layer Fit

Fits like a comfortable t-shirt. Sits closer to the body but is not snug like athletic wear. Extra body length ensures shirt stays tucked in.

Extras:

CUSTOM SIZES & TIPS

If you have a need for custom fitting FR we can help make code compliant and custom clothing to fit.

The easiest way to make your custom size is for you to send us a “like” garment which we measure, create a custom pattern and then manufacture your custom fit FR. By a “like” garment we mean if you want a button up shirt send us your favorite non-FR button up shirt. Within a week we will send back your garment after taking its specifications. A few weeks later three sets of your soon to be favorite FR clothing will arrive at your door!

MEASURING YOUR T-SHIRT-SIZE

In most cases, your t-shirt size will directly correspond to the size of Benchmark FR shirt or outwear you normally wear.

ALREADY WEARING ANOTHER FR BRAND?

We can help! If you are currently wearing another FR brand we can easily determine what Benchmark FR size will fit closest to your garment. Most FR brands vary in fit and sizing may not be consistant between brands. Problem Solved; just tell us what brand and size you are wearing and we can tell you the Benchmark FR size that corresponds directly to that brand. Please call (888) 360-0663.