Spend $100 & Get A Free CAT 1 Neck Gaiter
Spend $100 & Get A Free CAT 1 Neck Gaiter
3036FRLG-SK
Sold Out
Collections: All, FR Accessories, FR Accessories
Category: 7.5 oz. Inherent FR Blend, ASTM F1506, Ebt = 9 cal/cm2, HRC 2, Made In The USA, NFPA 70E Compliant
The FR Lite Balaclava solves a lot of problems with other balaclavas. It's maneuverable. It thin. You can pull it below your chin and then it needs to sit back on your nose it will. It is never itchy and wicks moisture.
FR Lite Balaclava is made in the USA from an inherently flame resistant blend of fibers. The material is soft and breathable, never itchy. It fits comfortably under any hard hat and will adjust to the wearer's head & face. The top section is constructed like a skull cap and incorporates a face mask which can pull down below the chin.
Unless you have an extraordinarily large head, well outside the pumpkin index, this is a one size fits all head apparatus. If you do happen to need a much bigger, or much smaller, balaclava then contact us and we can make it for you. This product comes with an unconditional lifetime warranty, so as long as you do not lose it, we will fix or replace it, guaranteed.
Compliance
Chest
From a standing position, measure the circumference of your upper body at the fullest part of your chest, typically just under the arm pit.
Sleeve
Bend your elbow as shown. Start at the center back of your neck and measure across the shoulder, around the elbow and to your wrist.
Waist
Measure around your natural waist where your pants sit most comfortably. Alternatively, you can look at the tag in the pants you are wearing.
Inseam
Remove your shoes and measure from your crotch to your ankle.
Men's Pants & Jeans [ Work Fit]
Size | W30 | W32 | W34 | W36 | W38 | W40 | W42 | W44 | W46 | W48 |
Measured Waist, Inches | 30-31 1/2 | 32-33 1/2 | 34-35 1/2 | 36-37 1/2 | 38-39 1/2 | 40-41 1/2 | 42-43 1/2 | 44-45 1/2 | 46-47 1/2 | 48-49 1/2 |
Pant Waist Circumference, Inches | 31 1/2 | 33 1/2 | 35 1/2 | 37 1/2 | 39 1/2 | 41 1/2 | 43 1/2 | 45 1/2 | 47 1/2 | 49 1/2 |
Pant Low Hip Circumference, Inches | 41 | 43 | 45 | 47 | 49 | 51 | 53 1/2 | 55 | 57 | 59 |
Inseam Length | All pants are hemmed to length. Specify inseam length or X-Short (28"), Short (30"), Regular(32"), Long (34"), X-Long (36"). |
Men's Button Up Shirts [Work Fit]
Size | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
Measured Chest, Inches | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 | 62-64 |
Shirt Chest Circumference, Inches | 45 | 47 | 49 | 51 1/2 | 55 | 59 | 63 | 67 |
Shirt Sleeve Length, Inches | 33 1/2 | 34 1/2 | 35 | 35 3/4 | 35 3/4 | 35 3/4 | 35 3/4 | 35 3/4 |
Shirt Back Length, Inches | 29 | 30 | 31 | 31 1/2 | 32 | 33 | 33 1/2 | 33 3/4 |
Tall Shirt Sleeve Length, Inches | 36 1/2 | 37 1/4 | 37 1/4 | |||||
Tall Shirt Back Length, Inches | 32 | 32 1/2 | 33 |
Men's 2nd Skin Shirt [Base Layer Fit]
Size | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
Measured Chest, Inches | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 | 62-64 |
Shirt Chest Circumference, Inches | 41 1/2 | 43 1/2 | 45 1/2 | 48 | 51 1/2 | 55 1/2 | 59 1/2 | 63 1/2 |
Shirt Sleeve Length, Inches | 33 3/4 | 34 1/8 | 35 1/8 | 35 3/2 | 35 3/8 | 35 3/8 | 35 3/4 | 35 3/8 |
Shirt Back Length, Inches | 28 | 29 | 30 | 31 | 31 | 31 3/4 | 31 3/4 | 32 1/2 |
Men's Sweatshirts [Work Fit]
Size | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
Measured Chest, Inches | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 | 62-64 |
Sweatshirt Chest Circumference, Inches | 44 | 46 | 48 | 50 | 54 | 58 | 62 | 64 |
Sweatshirt Sleeve Length, Inches | 34 3/4 | 35 1/2 | 36 1/4 | 37 | 37 | 37 | 37 | 37 |
Sweatshirt Back Length, Inches | 28 | 29 | 29 1/2 | 30 | 30 1/4 | 31 1/2 | 32 3/2 | 33 |
Men's Jackets [Outerwear Fit]
Size | S | M | L | XL | 2XL | 3XL | 4XL | 5XL |
Measured Chest, Inches | 34-36 | 38-40 | 42-44 | 46-48 | 50-52 | 54-56 | 58-60 | 62-64 |
Jacket Chest Circumference, Inches | 48 | 50 | 52 | 54 3/4 | 58 1/2 | 62 1/2 | 66 1/2 | 70 1/2 |
Jacket Sleeve Length, Inches | 33 1/4 | 33 1/2 | 35 | 35 3/4 | 35 7/8 | 35 7/8 | 36 3/8 | 36 3/8 |
*Jacket Back Length, Inches | 28 1/4 | 28 1/4 | 28 3/4 | 28 3/4 | 29 1/4 | 29 1/4 | 29 3/4 | 29 3/4 |
*Shows Insulated Bomber Jacket (6008FR) length. Add 2" for Insulated Parka (6015FR) Length.
Can be worn over a base layer, work shirt or combination of both and still provides room for movement.
Designed to be worn over a base layer or t-shirt. Has extra room around arm pit and chest for ease of mobility. Extra body length ensures shirt stays tucked in.
Fits like a comfortable t-shirt. Sits closer to the body but is not snug like athletic wear. Extra body length ensures shirt stays tucked in.
If you have a need for custom fitting FR we can help make code compliant and custom clothing to fit.
The easiest way to make your custom size is for you to send us a “like” garment which we measure, create a custom pattern and then manufacture your custom fit FR. By a “like” garment we mean if you want a button up shirt send us your favorite non-FR button up shirt. Within a week we will send back your garment after taking its specifications. A few weeks later three sets of your soon to be favorite FR clothing will arrive at your door!
In most cases, your t-shirt size will directly correspond to the size of Benchmark FR shirt or outwear you normally wear.
We can help! If you are currently wearing another FR brand we can easily determine what Benchmark FR size will fit closest to your garment. Most FR brands vary in fit and sizing may not be consistant between brands. Problem Solved; just tell us what brand and size you are wearing and we can tell you the Benchmark FR size that corresponds directly to that brand. Please call (888) 360-0663.